Memoq MR-720 Manual de usuario descargar pdf (Pagina 36)

OPERATION

2-13

COMPONENT DIMENSIONS The radial fixture can accommodate components with a lead spacing from

0.2" (5mm) up to 3.8" (96.5mm) with a minimum lead length of 0.16" (4mm). The

axial lead adapter can accommodate parts with a maximum body length of 2.7"

(68.6mm) and a maximum diameter of 1.8" (45.7mm). The closest the adapters

can get is 0.12" (3.0mm). The minimum lead length (of each lead) is 0.25"

(6.4mm). However the minimum length of the part and lead combined is 0.7"

(17.8mm). See the diagrams below. Lead diameter for either fixture configuration

can vary from 0.008" (.20mm or 32 AWG) up to 0.070" (1.8mm or 13 AWG).

OPTIONAL FIXTURES

ADAPTER The Kelvin Clips, SMD Tweezers and BNC adapters all connect to the

SR715/720 fixture using the same adapter. To install the fixture adapter, first

remove any parts or adapters from the fixture. Then plug the fixture adapter into

the fixture, matching the polarity of the adapter to the polarity of the SR715/720.

Make certain that the center clips makes contact with the center guard ground.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 108 109

Sin comentarios

Memoq MR-720 Manual de usuario Pagina 36